Receipt Printer

Detailed Product Description

76mm receipt impact dot matrix printer

 

Technique Specification

1.Printing Mode:    9 pin parallel bidirectional printing with cutter or not;

2.Printing Density: 42CPL-210(Full dot)/420(half dot)   

                            40CPL-200(Full dot)/400(half dot)

3.Printing Speed:   7.1 Line/sec at 16CPL   

                            4.1 Line/sec at 40CPL     

                            4    Line/sec at 42CPL

4.Printing Width:   42CPL-42(7×7)/35(5×7) 

                           40CPL-40(7×7)/33(5×7)

5.Feeder Speeder: about 100mm/sec

6.Black mark inspection: Black mark printed at the right side of the receipt, the height is 5mm(along the feeder direction), the min width is 12mm;Part of the reflect rate of the black mark is not more than 10%, the reflect rate of the rest part is more than 75%.

7.Ribbon: ERC-39 ribbon with box: purple or black(EPSON or other compatible ribbon)

8.Reliability of the printing: 9 million line(MCBF), the ribbon which was appointed by the manufacturer is necessary.

Printing character

1.Support IBM character font II:  7×7dot or 5×7dot

2.International standard I, II class Chinese font:  24×24dot 3.00(width)×3.00(height)mm

Interface Form

1.Serial interface:  D-SUB 25thread socket(female), compatible with RS-232; Support DTR/DSR; asynchronism serial communication:9600bps/19200bps; 8 digit data; 1digit stop

2.Parallel interface:  8 digit parallel interface; BUSY handshaking protocol, PE without paper detection, interface socket take D-SUB25 thread socket(pin)

3.Cashbox Control:  DC24v, 2A, 6 Thread RJ-11 socket.